Introduction of 4 Digital Block Displays & 3 Operation keys on BL6 Integrated Controller
Introduction of 4 Digital Block Displays & 3 Operation keys on BL6 Integrated Controller
Digital Display Blocks
There are 4 sets of segmental displays on the BL6 integrated controller's main board, each set has a dot (from version 7125 starts, these dots are used to indicate elevator state information). Under normal state without error (Inspection, Manual, Used, Fire, Stop):
1. First dot represents front door light curtain and safety edge signals. Signals are valid,
dot lights on. Dot turns off when signals are invalid;
2. Second dot represents rear door light curtain and safety edge signals. Signals are valid,
dot lights on. Dot turns off when signals are invalid;
3. Third dot represents inspection signals via CAN communication (car top and pit).
Communication inspection signal is valid, dot lights on. Dot turns off when signals are
invalid;
4. Fourth dot is reserved.
Operation Keys
ESC: Cancel/return key;
▽: Flip key;
ENTER: OK key;
